thermal fatigue property meaning in Chinese

热疲劳性能

A testing study on thermal fatigue property of building up casting pipe model
堆焊铸管模热疲劳性能试验研究
Effect of revert recycle times on microstructure and thermal fatigue properties in cobalt - base superalloy k640s
返回次数对一种钴基高温合金组织及冷热疲劳性能的影响
This paper mainly analyzed sn - cu eutectic solder alloys ' research production of wetting characteristics and their tensile property , shear property , creep property , fatigue property and thermal fatigue property when the block of sn - cu eutectic solder alloys joined by backing
摘要主要叙述了锡铜合金的润湿性质以及它们的块材与基材连接时的拉伸特性、剪切特性、蠕变特性、疲劳特性及热疲劳特性等方面的研究结果。
For the manifold of sedan engine , the hest thermal fatigue properties can be obtained by keeping the percent of vermicular graphite at about 50 % , therefore it shouldn ' t he considered that the lowest e . g . percent limit of 50 % specified in chinese vermicular iron standard is too lower , and it is also not proper to take the v . g . percent as the basis for judging the level of production technology
摘要对轿车发动机排气歧管而言，蠕化率控制在50 %左右可以获得最佳的抗热疲劳性能，因此不能认为我国的蠕铁标准中规定的蠕化率高于50 %的要求偏低了，也不能把蠕化率的高低作为衡量工艺水平的依据。